ett Installation Instructions

Set-up Instructions

As an initial step, we recommend that you first access Trail Tracker before it is locked in through Site Kiosk to make sure the application will operate correctly within the kiosk. All you need to do is copy and paste the correct url into the browser, and press F11 to go into full screen mode. If it appears that some buttons or scroll bars are missing and the entire screen page is not visible, you will need to adjust the monitor screen resolution so that it is set at 1280 X 1024

The application will be fully functional for you at this point.

I have pasted below a series of steps to secure the computer against unauthorized access and lock it in on the Trail Tracker application:

(1) You will need to download SiteKiosk at

http://www.provisio.com/en-US/Downloads/Download.aspx?ItemId=1?

(2) After running the setup program, you will need the license information to register SiteKiosk. CLO will provide that information prior to your installation.

(3) Important: be sure to load the provided configuration file before running SiteKiosk.  After the installation is complete, save the attached file somewhere on the hard drive (we recommend putting it in the default location of C:/ProgramFiles/SiteKiosk/Config).  Go to Start...All Programs...Site Kiosk...Configure Site Kiosk.  On the main Welcome page there will be an option to load an existing configuration.  Browse to the config file and select it.  Press OK, and select "overwrite old configuration file".  If all goes well, when you run the SiteKiosk app it should go into full screen restricted mode and you should see the eTT application.  To exit restricted mode, press the 'Esc' key and enter the password 'keyosque'.

NOTE: The default windows login password for the SiteKiosk user is 'provisio'.