Team Challenges (with optimal number of students and team leader if known)

Design

Documentation

• update design algorithm descriptions
• update variable list
• complete documentation of AutoCAD script generation

Upgrade design tool

• create method to make it possible to choose a layout
• add AguaClara design stamp and disclaimer to drawing
• create layouts of useful views
• create materials list

Design plants

• design plants for Agua Para el Pueblo

Move the design capabilities to the web (1)

• Complete LabVIEW online tool

Document past designs

• Create a single table with a list of critical as built parameters for all of the AguaClara plants

Research

Tube Floc

• Document effects of varying
  • influent turbidity
  • alum dose
  • flocculator length
  • flow rate
• Develop the optimal relationship between G and Gθ
• Develop method to test optimal relationship between G and Gθ either by varying the flow rate in real time or by building a flocculator with a variable cross sectional area or using some other technique
• Help develop a method to transfer knowledge from the tube flocculator to full scale baffled flocculators.

Linear Flow Orifice Meter

• Test the new design algorithm for linearity
• Develop an algorithm for the maximum flow that can be carried by a linear flow orifice meter as a function of pipe diameter.
• Write a paper detailing the theory and design of the Linear Flow Orifice Meter

Flow Controller linearity and calibration

• test linearity of response and create calibration protocol
• compare with theory and explain any differences
• upgrade flow controller design algorithm to handle both alum and chlorine

Flow Controller chlorine metering

• Determine what causes flow to decrease over time and develop a method to prevent this failure mode

Automated chemical doser

• Complete prototype
• Test prototype
• Develop calibration procedure
• Create plan to implement this in an AguaClara water treatment plant in Honduras during the January intersession or provide detailed info for the AguaClara team in Honduras to fabricate and install it during the fall semester.

Floc blanket (laboratory research)

• Optimize design and operating parameters for floc blankets
• Develop an understanding of the relationships between solids fraction, bulk density, velocity gradients, floc size, and settled effluent quality

Plate settler spacing (laboratory research)

• Determine the effects of varying plate settler spacing on effluent turbidity and on operation and maintenance requirements

Pilot Plant at the Cornell University Water Filtration Plant

Design and build a larger scale sed tank that will make it possible to fully test our sed tank designs

Floc blanket and Plate settler

• Test plate settler performance with and without a floc blanket to access the utility of floc blankets.

  Triangular manifold for sed tanks

• Build manifold prototype and test ability to uniformly deliver flow to plate settlers
• Explore overlapping alternating jets from the two manifolds as an inlet configuration that would distribute flow more uniformly into a sed tank (where jets impinge flow would be vertical toward center of tank, where jets miss each other flow would be toward walls of the tank)

  Tapered flocculation

• Experiment with alternative designs for G vs Gθ (this could interfere with the sedimentation research. Perhaps this should wait until the tube floc and CFD research teams can provide an improved design.)

Computation Fluid Dynamics (baffled flocculator)

• Determine which turbulence model is best for modeling energy dissipation in jets.
• Quantify the energy dissipation distribution
• Quantify the effective Gθ for a single bend
• Develop an improved design algorithm that appropriately accounts for the energy dissipation distribution. (This might be as simple as quantifying the value of Pi.FlocDissipation.)

Computation Fluid Dynamics (sedimentation tank manifold design)

• Model the flow distribution in the bottom of a sedimentation tank
• Devise an optimal design for creating uniform flow

Outreach

• Hollister Hall poster*
• Raise $100,000 for water treatment plants to be built between January and August
• Actively pursue corporate sponsorship and foundations

Wiki

• Update or assign update tasks to teams for all outdated wiki pages.
• Develop organizational guideline for wiki
• Develop guidelines on wiki page size to improve download speed
• Improve theme to make browsing easier and to give a more professional appearance
• Access whether alternate themes could improve page load time