*** This version of Confluence is for testing only and contains a copy of content from June 29th 2026. No changes will be preserved. ***
-
Created by
user-c9eba, last updated on Jun 30, 2009
2 minute read
Variable Name |
English Description |
|---|---|
A.SedManifoldEntrance |
Area of the port cut in the inlet channel |
A.SedSludge |
Cross-sectional area of rectangular sed sludge drain |
B.PipeSedPlateFrame |
Center-to-center distance between pipes in the sed plate frame |
B.PipeSedPlateStand |
Center-to-center distance between pipes in the plate settlers stand |
H.Et |
Height of the entrance tank wall |
H.ExitChannel |
Height of the exit channel |
H.Floc |
Total Height of the flocculator |
H.InletChannel |
Height of the inlet channel |
H.Sed |
Height of the sedimentation tank |
L.Channel |
Length of the inlet channel |
L.Et |
Length of the entrance tank |
L.ExitChannel |
Length of the exit channel |
L.Sed |
Total Length of the sedimentation tank |
L.SedLaunders |
Length of the sed tank launders |
L.SedPlate |
Length of the plate settlers |
L.SedPlateSheet |
Length of sheets used to make plate settlers |
L.SedSlopeManifold |
Length of the concrete plate creating the top of the inlet manifold |
N.FlocChannels |
Number of floc channels |
N.FlocChannelBaffles |
Number of floc baffles in each channel |
N.Launders |
The number of launders |
N.PipeSedPlateStand |
Number of pipes in the plate settlers stand |
N.SedBays |
The number of sedimentation bays |
N.SedInletPipes |
The number of sed inlet pipes |
N.SedLaunders |
Number of Sed Launders |
N.SedPlates |
Number of Sed Plates |
N.SedPlatesPerSheet |
Number of plate settlers per lamella sheet |
N.SedPlatesTotal |
Total number of plate settlers |
N.SedPorts |
Number of sed ports |
N.SedTanks |
The total number of sedimentation tanks |
N.Valves |
Number of valves |
Q.AlumStockMax |
Flow rate for aluminum stock tank |
T.ChannelWall |
Thickness of the inlet and exit channels |
T.EtWall |
Thickness of an entrance tank wall |
T.FlocBaffle |
Thickness of flocculator baffle material |
T.PltWall |
Thickness of a plant wall |
T.PlantWall |
Thickness of a plant wall |
T.SedManifoldEntrance |
Thickness of port made in inlet channel |
T.SedSlopePlate |
Thickness of the sed slope plate |
Ti.StockMin |
Duration of alum stock tank at maximum alum dose and plant flow rate |
W.Et |
The width of the entrance tank |
W.ExitChannel |
The width of the exit channel |
W.FlocChannel |
The width of the floc channel |
W.InletChannel |
The width of the inlet channel |
W.Sed |
Width of a sed tank |
W.SedSlopePlate |
Width of a sed slope plate |
|
|