Page History

...

(1) You will need to download SiteKiosk at

http://www.testversion.biz/provisio/sitekiosk6.exesitekiosk.com/en-US/Downloads/Download.aspx?ItemId=1

(2) After running   Run the setup program.  When you are prompted, just use all of the default options and continue pressing "next".  On the last screen, after everything has been installed press "Finish" to go into the SiteKiosk configuration program.

(3) In the welcome screen of the "Configure SiteKiosk" application you should enter you will need the license information to register SiteKiosk. CLO will provide that information prior to your installation.

(34) Important: be sure to load the provided configuration file before running SiteKiosk.   After the installation is complete, save the attached Save this configuration file somewhere on the hard drive (we recommend putting it in the default location of C:/ProgramFiles/SiteKiosk/Config).  Go to Start...All Programs...Site Kiosk...Configure Site Kiosk.  On the main same Welcome page screen there will be an option to load an existing configuration.   Browse to the config file and select it.  Press OK, and select "overwrite old configuration file".  (A "SiteKiosk" startup options dialog will appear.  On this page you can choose whether or not to have SiteKiosk automatically login as the SiteKiosk windows user and go immediately to the eBird Trail Tracker when the computer boots up.  NOTE: The default windows login password for the SiteKiosk user is 'provisio').  Press "OK".  It will now prompt you to restart the computer.  If all goes well, when the computer boots up or when you run the SiteKiosk app manually it should go into full screen restricted mode and you should see the eTT application.  To If you need to exit restricted mode to reconfigure SiteKiosk or login as a different Windows user, press the 'Esc' key and enter the password 'keyosque'.NOTE: The default windows login password for the SiteKiosk user is 'provisio'.follow the instructions here: Exiting eTT