*** This version of Confluence is for testing only and contains a copy of content from June 29th 2026. No changes will be preserved. ***
Variable Name | English Description |
|---|---|
A.SedManifoldEntrance | Area of the port cut in the inlet channel |
A.SedSludge | Cross-sectional area of rectangular sed sludge drain |
B.PipeSedPlateFrame | Center-to-center distance between pipes in the sed plate frame |
B.PipeSedPlateStand | Center-to-center distance between pipes in the plate settlers stand |
H.Et | Height of the entrance tank wall |
H.ExitChannel | Height of the exit channel |
H.Floc | Total Height of the flocculator |
H.InletChannel | Height of the inlet channel |
H.Sed | Height of the sedimentation tank |
L.Channel | Length of the inlet channel |
L.Et | Length of the entrance tank |
L.ExitChannel | Length of the exit channel |
L.Sed | Total Length of the sedimentation tank |
L.SedLaunders | Length of the sed tank launders |
L.SedPlate | Length of the plate settlers |
L.SedPlateSheet | Length of sheets used to make plate settlers |
L.SedSlopeManifold | Length of the concrete plate creating the top of the inlet manifold |
N.FlocChannels | Number of floc channels |
N.FlocChannelBaffles | Number of floc baffles in each channel |
N.Launders | The number of launders |
N.PipeSedPlateStand | Number of pipes in the plate settlers stand |
N.SedBays | The number of sedimentation bays |
N.SedInletPipes | The number of sed inlet pipes |
N.SedLaunders | Number of Sed Launders |
N.SedPlates | Number of Sed Plates |
N.SedPlatesPerSheet | Number of plate settlers per lamella sheet |
N.SedPlatesTotal | Total number of plate settlers |
N.SedPorts | Number of sed ports |
N.SedTanks | The total number of sedimentation tanks |
N.Valves | Number of valves |
Q.AlumStockMax | Flow rate for aluminum stock tank |
T.ChannelWall | Thickness of the inlet and exit channels |
T.EtWall | Thickness of an entrance tank wall |
T.FlocBaffle | Thickness of flocculator baffle material |
T.PltWall | Thickness of a plant wall |
T.PlantWall | Thickness of a plant wall |
T.SedManifoldEntrance | Thickness of port made in inlet channel |
T.SedSlopePlate | Thickness of the sed slope plate |
Ti.StockMin | Duration of alum stock tank at maximum alum dose and plant flow rate |
W.Et | The width of the entrance tank |
W.ExitChannel | The width of the exit channel |
W.FlocChannel | The width of the floc channel |
W.InletChannel | The width of the inlet channel |
W.Sed | Width of a sed tank |
W.SedSlopePlate | Width of a sed slope plate |
|
|