Sign-up for free online course on ANSYS simulations!-
Created by
user-6c822, last updated on Jul 14, 2011
1 minute read
Unable to render {include} The included page could not be found.
Author: Ben Mullen, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Problem Specification
In this exercise, we will examine the stresses and deformation of a wind turbine blade under a force load.
The blade is composed of an outer surface and an inner spar. The spar is 0.02 meters thick and the outer surface is of varying thickness. A table containing the material properties of the two parts is below.
|
Spar |
Outer Surface |
|---|---|---|
Young's Modulus (Pa) |
101E9 |
33E9 |
Poisson's Ratio |
0.30 |
0.30 |
Thickness (m) |
0.02 |
0.03 - 0.00048485*X |
Go to Step 1 - Pre-Analysis & Start-Up
Go to all ANSYS Learning Modules