General Program Information

Basics - Cylinders

cylinderA - a function that takes in the inputs of a point, radius. and length to render a cylinder perpendicular to the point given. This function is used at the beginning or middle of a line of AutoCAD code.
cylinderA(p1,R1,L) :=

• ("_cylinder",sp,point(p1^<0>^),sp,stringit(R1),sp,stringit(L),sp)

cylinderB - a function that takes in the inputs of two points and a radius to render a cylinder at any angle in space. This function is used at the beginning or middle of a line of AutoCAD code.
cylinderB(p1,R1,p2) :=

• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"c",sp,point(p2}<0>^),sp) if acad_version = 2004 v 2006
• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"a",sp,point(p2}<0>^),sp) if acad_version = 2007
• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"a",sp,point(p2}<0>^),sp) if acad_version = 2008
• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"f",sp,point(p2}<0>^),sp) otherwise

cylinderC - a function that takes in the inputs of a point, radius. and length to render a cylinder perpendicular to the point given. This function is used at the end of a line of AutoCAD code.
cylinderC(p1,R1,L) :=

• ("_cylinder",sp,point(p1^<0>^),sp,stringit(R1),sp,stringit(L),sp)

cylinderD - a function that takes in the inputs of two points and a radius to render a cylinder at any angle in space. This function is used at the end of a line of AutoCAD code.
cylinderD(p1,R1,p2) :=

• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"c",sp,point(p2}<0>^),sp) if acad_version = 2004 v 2006
• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"a",sp,point(p2}<0>^),sp) if acad_version = 2007
• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"a",sp,point(p2}<0>^),sp) if acad_version = 2008
• ("_cylinder",sp,point(p1^<0>^{),sp,stringit(R1),sp,"f",sp,point(p2}<0>^),sp) otherwise