Pipe

AutoCAD Pipe Program

Note: All coordinates are referenced in top view in the program unless otherwise specified 
Input Definitions

• sludgepipe_origin is a 3*1 matrix with x,y,z positions corresponding to the point where the manifold will be drawn

• sludepipe_inr is the radius of the inner cylinder
• sludgepipe_outr is the radius of the outer cylinder
• rad_hole is the radius of the orifice hole
• tank_length is the length of the tank
• orifice_dist is the distance between successive orifices 
  Technical Program Outline
  zoom_win - zooms on a window spacepipe1 - draws a pipe (from the pipe program) with no zoomcylinder3 - is to draw a cylinder for orifice purposeviewrightside - change view to viewrightsidearray1 - draw starting at point p1, n1 -- as many rows as the tank length/orifice dist, n2 - 1 and provide orifice distance as the next draw point for the cylindersubtract1 - subtract unneeded portion of the cylinders
  AutoCAD Pipe Program