Elbow Drawing Script

layer4 - Layer_new creates a new green layer "elbow."

layer4 <- layer_new("elbow",green)

{float:left|border=2px solid black}
[!elbow1.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

elbow1 - Calls the Elbow Program to create an elbow.

elbow1 <- elbow(sedtankelbow1_origin,ND_{SedPipeEntrance},EN_PipeSpec)

sedtankelbow1_origin =

• x: Plant_Origin0 - L_Sed + W_InletChannel/2
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 3*(W_Sed/2 - outerradius(ND_SedLaunder))/4 - ElbowRadius(ND_{SedPipeEntrance})
• z: Plant_Origin2 + sedtankpipe9_length + S_SedInlet + 2ElbowRadius(ND_{SedPipeEntrance})

ND_{SedPipeEntrance} = The nominal diameter of the pipe. This value along with the pipe schedule is used to determine other actual dimensions of the elbow

EN_PipeSpec = The enumerated pipe schedule type. Each schedule of pipe is represented by a specific number within our code.

{float:left|border=2px solid black}
[!rotate6.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

rotate6 - Rotate_3d turns the object based on a given axis and degree angle.

rotate6 <- rotate_3d(p1,p2,"x",-90)

Note: p1 and p2 are dummy variables used only in the program help section to designate the matrix below.

p1 =

• x: sedtankelbow1_origin0
• y: sedtankelbow1_origin1 + ElbowRadius(ND_{SedPipeEntrance})
• z: sedtankelbow1_origin2 + innerD(ND_{SedPipeEntrance},EN_PipeSpec)/2

p2 =

• x: sedtankelbow1_origin0
• y: sedtankelbow1_origin1 + ElbowRadius(ND_{SedPipeEntrance})
• z: sedtankelbow_origin2

"x" - specifies axis that object will be rotated about.

-90 - rotation angle

{float:left|border=2px solid black}
[!rotate7.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

rotate7 - Rotate_3d turns the object based on a given axis and degree angle.

rotate7 <- rotate_3d(p1,p2,"y",90)

Note: p1 and p2 are dummy variables used only in the program help section to designate the matrix below.

p1 =

• x: sedtankelbow1_origin0
• y: sedtankelbow1_origin1 + ElbowRadius(ND_{SedPipeEntrance})
• z: sedtankelbow1_origin2 + innerD(ND_{SedPipeEntrance},EN_PipeSpec)/2

p2 =

• x: sedtankelbow1_origin0
• y: sedtankelbow1_origin1 + ElbowRadius(ND_{SedPipeEntrance})
• z: sedtankelbow_origin2

"y" - specifies axis that object will be rotated about.

90 - rotation angle.

{float:left|border=2px solid black}
[!copy1.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

copy1 - CopyDa duplicates the selected object.

copy1 <- copyDa(p1,sedtankpipe5_origin,sedtankpipe6_origin,sedtankpipe7_origin,sedtankpipe8_origin)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe5_origin0
• y: sedtankpipe5_origin1
• z: sedtankpipe5_origin2 - outerradius(ND_{SedPipeEntrance})

sedtankpipe5_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 3(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})

sedtankpipe6_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 1(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})

sedtankpipe7_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 1(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})

sedtankpipe8_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 3(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})
  
  

  {float:left|border=2px solid black} [!rotate8.bmp|width=280px!|AutoCAD Channel Program] Top View {float}

  rotate8 - Rotate_3d turns the object based on a given axis and degree angle.

rotate8 <- rotate_3d(p1,sedtankpipe1_origin,"z",sedtankpipe5_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe5_origin0
• y: sedtankpipe5_origin1
• z: sedtankpipe5_origin2 - outerradius(ND_{SedPipeEntrance})

sedtankpipe1_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 3(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})

"z" - specifies axis that object will be rotated about.

sedtankpipe5_angle = -(rad/deg) * atan((((5*L_Sed)/8 - W_Channel/2)/ [3 * (W_Sed/2 - outerradius(ND_SedLaunder))/4) + outerradius(ND_SedLaunder))^-1)

{float:left|border=2px solid black}
[!rotate9.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

rotate9 - Rotate_3d turns the object based on a given axis and degree angle.

rotate9 <- rotate_3d(p1,sedtankpipe2_origin,"z".sedtankpipe6_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe6_origin0
• y: sedtankpipe6_origin1
• z: sedtankpipe6_origin2 - outerradius(ND_{SedPipeEntrance})

sedtankpipe2_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 1(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})

"z" - specifies axis that object will be rotated about.

sedtankpipe6_angle = -(rad/deg) * (((L_Sed/8 - W_Channel/2)/ ((W_Sed/2 - outerradius(ND_SedLaunder))/4) + outerradius(ND_SedLaunder))^-1)

{float:left|border=2px solid black}
[!rotate10.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

rotate10 - Rotate_3d turns the object based on a given axis and degree angle.

rotate10 <- rotate_3d(p1,sedtankpipe3_origin,"z".sedtankpipe7_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe7_origin0
• y: sedtankpipe7_origin1
• z: sedtankpipe7_origin2 - outerradius(ND_{SedPipeEntrance})

sedtankpipe3_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 1(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})

"z" - specifies axis that object will be rotated about.

sedtankpipe7_angle = -(rad/deg) * atan(((3*L_Sed/8 - W_Channel/2)/ ((W_Sed/2 - outerradius(ND_SedLaunder))/4) + outerradius(ND_SedLaunder))^-1)

{float:left|border=2px solid black}
[!rotate11.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

rotate11 - Rotate_3d turns the object based on a given axis and degree angle.

rotate11 <- rotate_3d(p1,sedtankpipe4_origin,"z".sedtankpipe8_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe8_origin0
• y: sedtankpipe8_origin1
• z: sedtankpipe8_origin2 - outerradius(ND_{SedPipeEntrance})

sedtankpipe4_origin =

• x: Plant_Origin0 - L_Sed + ElbowRadius(ND_{SedPipeEntrance})
• y: Plant_Origin1 + W_Sed/2 + outerradius(ND_SedLaunder) + 1(W_Sed/2 - outerradius(ND{~}SedLaunder))/4
• z: Plant_Origin2 + (W_Sed/2)*tank(AN_SedBottom) + ElbowRadius(ND_{SedPipeEntrance})

"z" - specifies axis that object will be rotated about.

sedtankpipe8_angle = -(rad/deg) * atan((((7*L_Sed)/8 - W_Channel/2)/ (3*(W_Sed/2 - outerradius(ND_SedLaunder))/4) + outerradius(ND_SedLaunder))^-1)

layerset - Layer_set selects the layer "0".

layerset <- layer_set("0")

layerfreeze4 - Layer_freeze locks the layer "elbow" so that it cannot be edited.

layerfreeze4 <- layer_freeze("elbow")

layer5 - Layer_new creates a new green layer "elbowa."

layer5 <- layer_new("elbowa",green)

{float:left|border=2px solid black}
[!elbow5.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

elbow5 - Calls the Elbow Program to create an elbow.

elbow5 <- elbow(sedtankelbow5_origin,ND_{SedPipeEntrance},EN_PipeSpec)

sedtankelbow5_origin =

• x: tank_origin0 - (7*L_Sed)/8 - ElbowRadius(ND_{SedPipeEntrance})
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_{SedPipeEntrance})
• z: tank_origin2 + S_SedInlet + sedtankpipe9_length + ElbowRadius(ND_{SedPipeEntrance})

ND_{SedPipeEntrance} = The nominal diameter of the pipe. This value along with the pipe schedule is used to determine other actual dimensions of the elbow

EN_PipeSpec = The enumerated pipe schedule type. Each schedule of pipe is represented by a specific number within our code.

{float:left|border=2px solid black}
[!rotate14.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

rotate14 - Rotate_3d turns the object based on a given axis and degree angle.

rotate14 <- rotate_3d(p1,p2,"x",90)

Note: p1 and p2 are dummy variables used only in the program help section to designate the matrix below.

p1 =

• x: sedtankelbow5_origin0
• y: sedtankelbow5_origin1 + ElbowRadius(ND_{SedPipeEntrance})
• z: sedtankelbow5_origin2 + (innerD(ND_{SedPipeEntrance},EN_PipeSpec)/2)

p2 =

• x: sedtankelbow5_origin0
• y: sedtankelbow5_origin1 + ElbowRadius(ND_{SedPipeEntrance})
• z: sedtankelbow5_origin2

"x" - specifies axis that object will be rotated about.

90 - specifies rotation angle.

{float:left|border=2px solid black}
[!copy2.bmp|width=280px!|AutoCAD Channel Program]
Top View
{float}

copy2 - CopyDa duplicates the selected objuect.

copy2 <- copyDa(p1,sedtankelbow5_origin,sedtankelbow6_origin,sedtankelbow7_origin,sedtankelbow8_origin)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe9_origin0 - ElbowRadius(ND_{SedPipeEntrance})
• y: sedtankpipe9_origin1
• z: sedtankpipe9_origin2

sedtankelbow5_origin =

• x: tank_origin0 - (7*L_Sed)/8 - ElbowRadius(ND_{SedPipeEntrance})
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_{SedPipeEntrance})
• z: tank_origin2 + S_SedInlet + sedtankpipe9_length + ElbowRadius(ND_{SedPipeEntrance})

sedtankelbow6_origin =

• x: tank_origin0 - (5*L_Sed)/8 - ElbowRadius(ND_{SedPipeEntrance})
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_{SedPipeEntrance})
• z: tank_origin2 + S_SedInlet + sedtankpipe9_length + ElbowRadius(ND_{SedPipeEntrance})

sedtankelbow7_origin =

• x: tank_origin0 - (3*L_Sed)/8 - ElbowRadius(ND_{SedPipeEntrance})
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_{SedPipeEntrance})
• z: tank_origin2 + S_SedInlet + sedtankpipe9_length + ElbowRadius(ND_{SedPipeEntrance})

sedtankelbow8_origin =

• x: tank_origin0 - (1*L_Sed)/8 - ElbowRadius(ND_{SedPipeEntrance})
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_{SedPipeEntrance})
• z: tank_origin2 + S_SedInlet + sedtankpipe9_length + ElbowRadius(ND_{SedPipeEntrance}
  
  

  {float:left|border=2px solid black} [!rotate15.bmp|width=700px!|AutoCAD Channel Program] Top View {float}

  rotate15 - Rotate_3d turns the object based on a given axis and degree angle.

rotate15 <- rotate_3d(p1,sedtankpipe9_origin,"z".sedtankpipe6_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe9_origin1 - outerradius(ND_{SedPipeEntrance})
• y: sedtankpipe9_origin2
• z: sedtankpipe10_origin0

sedtankelbow9_origin =

• x: tank_origin0 - L_Sed + W_Channel + T_{ChannelWall + ElbowRadius(ND}SedLaunder~)
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_SedLaunder)
• z: tank_origin2 + HW_Sed - H_SedAbove/2 - ElbowRadius(ND_SedLaunder)

"z" - specifies axis that object will be rotated about.

sedtankpipe6_angle = -(rad/deg) * (((L_Sed/8 - W_Channel/2)/ ((W_Sed/2 - outerradius(ND_SedLaunder))/4) + outerradius(ND_SedLaunder))^-1)

{float:left|border=2px solid black}
[!rotate16.bmp|width=700px!|AutoCAD Channel Program]
Top View
{float}

rotate16 - Rotate_3d turns the object based on a given axis and degree angle.

rotate16 <- rotate_3d(p1,sedtankpipe10_origin,"z".sedtankpipe7_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe10_origin1 - outerradius(ND_{SedPipeEntrance})
• y: sedtankpipe10_origin2
• z: sedtankpipe11_origin0

sedtankelbow10_origin =

• x: tank_origin0 - L_Sed + W_Channel + T{~}ChannelWall
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_SedLaunder)
• z: tank_origin2 + H_Sed - H_Channel - T_Mp

"z" - specifies axis that object will be rotated about.

sedtankpipe7_angle = -(rad/deg) * atan(((3*L_Sed/8 - W_Channel/2)/ ((W_Sed/2 - outerradius(ND_SedLaunder))/4) + outerradius(ND_SedLaunder))^-1)

{float:left|border=2px solid black}
[!rotate17.bmp|width=700px!|AutoCAD Channel Program]
Top View
{float}

rotate17 - Rotate_3d turns the object based on a given axis and degree angle.

rotate17 <- rotate_3d(p1,sedtankpipe11_origin,"z".sedtankpipe5_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe10_origin1 - outerradius(ND_{SedPipeEntrance})
• y: sedtankpipe11_origin2
• z: sedtankpipe12_origin0

sedtankpipe11_origin =

• x: tank_origin0 - (3*L_Sed)/8
• y: tank_origin1 + W_Sed/2
• z: tank_origin2 + S_SedInlet

"z" - specifies axis that object will be rotated about.

sedtankpipe5{~}angle - specifies rotation angle.

{float:left|border=2px solid black}
[!rotate18.bmp|width=700px!|AutoCAD Channel Program]
Top View
{float}

rotate18 - Rotate_3d turns the object based on a given axis and degree angle.

rotate18 <- rotate_3d(p1,sedtankpipe12_origin,"z".sedtankpipe8_angle)

Note: p1 is a dummy variable used only in the program help section to designate the matrix below.

p1 =

• x: sedtankpipe12_origin0
• y: sedtankpipe12_origin1 - outerradius(ND_{SedPipeEntrance})
• z: sedtankpipe12_origin2

sedtankpipe12_origin =

• x: tank_origin0 - (L_Sed)/8
• y: tank_origin1 + W_Sed/2
• z: tank_origin2 + S_SedInlet

"z" - specifies axis that object will be rotated about.

sedtankpipe8{~}angle - specifies rotation angle.

layerset - Layer_set selects the layer "0".

layerset <- layer_set("0")

layerfreeze5 - Layer_freeze locks the layer "elbowa" so that it cannot be edited.

layerfreeze5 <- layer_freeze("elbowa")

layer6 - Layer_freeze locks the layer "elbowb" so that it cannot be edited.

layer6 <- layer_new("elbowb",green)

elbow9 - Calls the Elbow Program to create an elbow.

elbow9 <- elbow(sedtankelbow9_origin,ND_SedLaunder,EN_PipeSpec)

sedtankelbow9_origin =

• x: tank_origin0 - L_Sed + W_Channel + T_{ChannelWall + ElbowRadius(ND}SedLaunder~)
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_SedLaunder)
• z: tank_origin2 + HW_Sed - H_SedAbove/2 - ElbowRadius(ND_SedLaunder)

ND_{SedPipeEntrance} = The nominal diameter of the pipe. This value along with the pipe schedule is used to determine other actual dimensions of the elbow

EN_PipeSpec = The enumerated pipe schedule type. Each schedule of pipe is represented by a specific number within our code.

rotate19 - Rotate_3d turns the object based on a given axis and degree angle.

rotate19 <- rotate_3d(p1,p2,"z",90)

Note: p1 and p2 are dummy variables used only in the program help section to designate the matrix below.

p1 =

• x: sedtankelbow9_origin0
• y: sedtankelbow9_origin1 + ElbowRadius(ND_SedLaunder)
• z: sedtankelbow9_origin2 + (innerD(ND_SedLaunder,EN_PipeSpec)/2)

p2 =

• x: sedtankelbow9_origin0
• y: sedtankelbow9_origin1 + ElbowRadius(ND_SedLaunder)
• z: sedtankelbow9_origin2

"z" - specifies axis that object will be rotated about.

90 - specifies rotation angle.

rotate20 - Rotate_3d turns the object based on a given axis and degree angle.

rotate20 <- rotate_3d(p1,p2,"x",90)

Note: p1 and p2 are dummy variables used only in the program help section to designate the matrix below.

p1 =

• x: sedtankelbow9_origin0
• y: sedtankelbow9_origin1 + ElbowRadius(ND_SedLaunder)
• z: sedtankelbow9_origin2 + (innerD(ND_SedLaunder,EN_PipeSpec)/2)

p2 =

• x: sedtankelbow9_origin0
• y: sedtankelbow9_origin1 + ElbowRadius(ND_SedLaunder)
• z: sedtankelbow9_origin2

"x" - specifies axis that object will be rotated about.

90 - specifies rotation angle.

elbow10 - Calls the Elbow Program to create an elbow.

elbow10 <- elbow(sedtankelbow10_origin,ND_SedLaunder,EN_PipeSpec)

sedtankelbow10_origin =

• x: tank_origin0 - L_Sed + W_Channel + T{~}ChannelWall
• y: tank_origin1 + W_Sed/2 - ElbowRadius(ND_SedLaunder)
• z: tank_origin2 + H_Sed - H_Channel - T_Mp

ND_{SedPipeEntrance} = The nominal diameter of the pipe. This value along with the pipe schedule is used to determine other actual dimensions of the elbow

EN_PipeSpec = The enumerated pipe schedule type. Each schedule of pipe is represented by a specific number within our code.

rotate21 - Rotate_3d turns the object based on a given axis and degree angle.

rotate21 <- rotate_3d(p1,p2,"x",-90)

Note: p1 and p2 are dummy variables used only in the program help section to designate the matrix below.

p1 =

• x: sedtankelbow10_origin0
• y: sedtankelbow10_origin1 + ElbowRadius(ND_SedLaunder)
• z: sedtankelbow10_origin2 + (innerD(ND_SedLaunder,EN_PipeSpec)/2)

p2 =

• x: sedtankelbow10_origin0
• y: sedtankelbow10_origin1 + ElbowRadius(ND_SedLaunder)
• z: sedtankelbow10_origin2

"x" - specifies axis that object will be rotated about.

-90 - specifies rotation angle.

layerset - Layer_set selects the layer "0".

layerset <- layer_set("0")

layerfreeze6 - Layer_freeze locks the layer "elbowb" so that it cannot be edited.

layerfreeze6 <- layer_freeze("elbowb")