AutoCAD Program Help Page Guidelines

Final picture of program output with clearly marked origin points and important dimensions
Specifics Sections (within general section): (Heading 3 on the wiki)
- Input Definitions - should list any major inputs to the specific program and an explanation of what that input represents, inputs should be listed one after the other, without additional lines between and with a dash ( - ) between the input name and its explanation (inputs that are points should have three bullets beneath the input name, with the x,y,and z explanations at those three bullets)
  - Inputs Needed to Call Function (Heading 5 on the wiki)
  - Inputs Found from Pipe Database (Heading 5 on the wiki) - only add this section where necessary
  - Inputs Defined within the Function (Heading 5 on the wiki)
- Pipe Labeling - Labeling Sections should show images with the specific pieces labeled, as in pictures with many pipes
- Elbow Labeling
- etc. (use whichever additional labeling sections that are relevant to the program)

Should include a step by step explanation of the program with images above the explanation of each step
Can reference other functions to limit repetitiveness
Images given should define specific points and dimensions for the program
When helpful, images should be used to give perspective of the current drawing in relation to its position within the plant

Please see AutoCAD Pipe Program for a full example of the necessary information on an AutoCAD Program Help Page

General Program Information