{include: FLUENT Google Analytics}
{include: Turbulent Pipe Flow - Panel}

h1. Turbulent Pipe Flow

Created using ANSYS 13.0

h2. Problem Specification

!Fluent_pipeflow.jpg!

Let's revisit the pipe flow example considered in the previous exercise.          As before, the inlet velocity is 1 m/s, the fluid exhausts into the ambient          atmosphere and density is 1 _kg/m{_}{_}{^}3{^}_. For µ = 2          x 10 ^\-5^ _kg/(ms_), the Reynolds no. based on the pipe diameter          and average velocity at the inlet is
{latex}
\large
$$
{Re} = {\rho VD \over \mu} = 10,000
$$
{latex}
This change of viscosity has taken us from a Reynolds number of 100 to 10,000.  At this Reynolds number, the flow is usually completely turbulent.

We'll solve this problem numerically using ANSYS FLUENT. Among the results we'll look at are centerline velocity, skin friction coefficient and the axial velocity profile at the outlet.
\\
\\
[*Go to Step 1: Pre-Analysis & Start-Up*|FLUENT - Turbulent Pipe Flow - Step 1]

[Go to all FLUENT Learning Modules|FLUENT Learning Modules]