h3. General Program Information

\\
{float:left|border=2px solid black}
[!Segment of floc tank.PNG|width=300px!|AutoCAD Channel Program]
Segment of Floc Tank
{float}\\
\\
\\
h3. Technical Program Outline

1) A new layer, "baffle," is created to draw all of the baffles in.

2) The baffles are placed iteratively in each channel from left to right of the floc tank.


4) All of the baffles are unioned as one object to allow the ports to be subtracted later in a single command.

5) The layer is set to "0" so that the "baffle" layer can be frozen.

6) The "baffle" layer is frozen.