Page History

Items to note before we start:

• This guide is geared towards a Windows user, but the process is very similar for Linux users.

• This requires access to both the Cornell VPN and to the MAE Shared network drive.

   

1. Install VPN
   Image Removed (skip if on Cornell campus network and jump to step 4)
   1. Choose the appropriate installation link for the operating system that you are using.
   2. This will require Administrative privileges.
      
      
2. Connect to VPN
   Image Removed (skip if on Cornell campus network)
   
   
3. Log  Log in to VPN with the tutorial provided in Step 2 (skip if on Cornell campus network)
   OR
   Launch the secure mobility client on your computer by typing cuvpn.cuvpn.cornell.edu in the address bar
   
   
   
   
4. Navigate to Open Windows Explorer and right-click on Network in the left bar of Windows Explorer and select Map Network Drive
   
   
   
   
5. Map a drive to the link: \\fs2.mae.cornell.edu/\shared$/\MAE/\software
   
   
   
   
6. Enter network credentials, which is your Cornell netID and (might have to add @cornell.edu) and password. This will work only if you have been provided with access to the network drive.
   
   
7. Select the folder for ANSYS
   
   
   
8. Locate the ISO in ANSYS>V15
   Image Removed
   
9. Copy the two ISO files appropriate to your specific operating system onto a local place on your computer
   Image Removed
   
10. You can access the files inside the ISO in two ways
    1. If you have Virtual Clone Drive, mount the ISO files
       Image Removed
    2. If you have 7Zip, extract the ISO files
       Image Removed
11. Once the set-up menu loads, select 'Install ANSYS products'
12. Run the setup according to the Wizard with the following exception:
    1. Check the box 'Skip this step for Workbench and Configure Later' when asked to enter information about various other programs
       Image Removed
13. Find "setup.exe" for the appropriate version and run it as administrator. Note that at some points, the installer is slow to respond. 
    
    
14. For licensing, enter the following information:
    1. When you reach the licensing stage, enter into 'Hostname 1' bar: ansys-lic.
    coeis
    1. coecis.cornell.edu
    Image Removed
15. Return to the set-up menu and select 'Install License Manager'

...

1. 1. For port number, enter 1055 
   
   If you have any questions about this process, please email itcoecis-help@cornell.edu.