Page History

2. Geometry

...

Tips for importing a Geometry from a CAD Package:

• Divide the geometry into various suitable components; this . This will be called an "assembly" in a standard CAD package.

• Use Save the CAD geometry in STEP format (.stp) .  and then import the .stp file into ANSYS. This is the most stable format.  recommended format.

• Double-click on Geometry in the project page in ANSYS, select all the parts in the tree using Ctrl-click. Then right-click and select "Form new part".

• After opening the model in ANSYS Mechanical, you will see a "Connections" folder in the tree. Make sure that the "contact" (i.e. interface) regions are all set to "bonded."
  This is the default contactfor interfaces between flush entities.

3. Mesh

...

See and rate the complete Learning Module

Go to all ANSYS Learning Modules