Pre-Analysis & Start-Up

Pre-Analysis

In the Pre-Analysis step, we'll first consider how to reduce the model using periodicity. Then, we'll review the following:

• Mathematical model: (e.g.: We'll look at the governing equations + boundary conditions and the assumptions contained within the mathematical model.)
• Numerical solution procedure in ANSYS: (e.g.: We'll briefly overview the solution strategy used by ANSYS and contrast it to the hand calculation approach.)
• Hand-calculations of expected results: (e.g.:

Model Reduction 

We'll

...

model half-a-bolt assuming periodic symmetry. The reduced model has four parts which are indicated in different colors in the image below.

Image Added

Mathematical Model 

...

Hand-Calculations of Expected Results

...

...

...

Go to Step 2: Geometry

Go to all ANSYS Learning Modules