*** This version of Confluence is for testing only and contains a copy of content from June 29th 2026. No changes will be preserved. ***
...
The first step is to add a new set point by clicking "Add Set Point" button. ON and OFF set points are added and set for 1 and 0, respectively. ON (or a value of 1) for a valve means that the valve is completely open, while OFF (or a value of zero) for a valve means that a valve is completely closed. Process control software utilizes fractions between 0 and 1 for process of valves that processes where you do not want valves to be completely open or closed during a full cycle.
...
Ensure that "code match" and "data match" are both green and that the calculated value agrees with the one shown in the figure below.
Exercise
Your next task is to add the following set points to process controller with the values after the comma respectively. Proceed to the next tutorial when you are finished.