...

...

4. Setup (Physics)

Material Properties

At this point, the material, Cornellium, will be assigned to the geometry. To assign the material, expand Geometry,Image Removed, in the tree outline. Next, click on Surface Body, Image Removed. Then set Assignment to Cornellium in the "Details of Surface Body" table, as shown below.

Adiabatic Boundaries

...

https://confluence.cornell.edu/download/attachments/146918515/PerfIns_Full.png

...

Isothermal Boundary

...

https://confluence.cornell.edu/download/attachments/146918515/InsTemp_Full.png

...

https://confluence.cornell.edu/download/attachments/146918515/SetTemp_Full.png

Convective Boundary

...

https://confluence.cornell.edu/download/attachments/146918515/InsConv_Full.png

...

https://confluence.cornell.edu/download/attachments/146918515/DetConv_Full.png

...

Image Added

Define Boundary Conditions

 <iframe width="640" height="360" src="https://www.youtube.com/embed/pG8euuRXOmc" frameborder="0" allowfullscreen></iframe>

Note

Make sure you have "Celsius" selected as the temperature unit under "Units"

...

Save

Save the project now. Do not close Mechanical.

Go to Step 5: Solution
See and rate the complete Learning ModuleNumerical Solution

Go to all ANSYS Learning Modules