Versions Compared

Old Version 57

changes.mady.by.user Unknown User (ec327)

Saved on

compared with

New Version 58

changes.mady.by.user Unknown User (ec327)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Sample HolderSubstrate TypeSubstrate Thickness

DiLL


  1. Microscope Slide: 24-26 mm x 50-76 mm

  2. Fused Silica Substrate, ITO-Coated substrate, Silicon Substrate: 25 x 25 mm²

  3. Borosilicate Substrate: Ø 30 mm
  4. Tiny Substrates: 12 mm > Ø 30 mm > 25.4 mm



1.00 mm

0.70 mm, 0.70 mm, 0.725 mm

0.17 mm 
0.30 mm


Multi-DiLL

Fused Silica Substrate, ITO-Coated substrate, Silicon Substrate: 25 x 25 mm²

0.70 mm, 0.70 mm, 0.725 mm

2" Wafer

Ø 2 inch Wafer0.35 – 0.55 mm

10 × Ø 30 mm

Ø 30 mm0.17 mm

These

...

resins are available at the CNF:

  • IP-DIP: IP-Dip is a liquid negative-tone 2PP resin formulation by NanoScribe designed for printing the finest possible features. IP-Dip is a component of the 3D SF Solution Set. Tall structures exceeding the working distance of the objective can be printed using the DiLL configuration.
  • IP-S: IP-S is a highly viscous liquid negative-tone 2PP resin formulation by NanoScribe designed for printing medium-sized features in DiLL. IP-S combines low shrinkage and high stability with a smooth structural surface finish perfect for micro-optics. The photosensitivity is tailored for two-photon polymerization and UV-curing is also possible. As a component of the 3D MF solution set, IP-S is suitable for printing structures with dimensions of several cubic millimeters.
  • IP-L 780: IP-L 780 is a liquid negative-tone 2PP resin formulation designed for printing small features in oil immersion configuration. IP-L 780 combines high resolution with low shrinkage and high stability.
  • IP-Q: IP-Q is a highly viscous liquid negative-tone 2PP resin formulation by NanoScribe. The 3D LF Microfabrication Solution Set, including IP-Q, extends 2PP 3D printing towards rapid printing of mesoscale structures with millimeter sizes, micrometer precision, and maximum throughput up to the macroscale.
  • SU-8: SU-8 is a UV-curable negative-tone 2PP resin by Kayaku Advanced Materials. This resin is well-known and widely used in the lithography community. [The following article applies only to SU-8 100 determined to be the most suitable resin for 2PP as it balances quality and printing speed.]

...

  • Microfluidics
  • Micromechanics
  • Biomedical Engineering
  • Micro-electro-mechanical systems
  • Mechanical metamaterials
  • Micro-optics
  • Photonic metamaterials and Plasmonics

Publications & Gallery


Note: A large part of the background information comes from NanoScribe's NanoGuide, Wikipedia, and ZEISS .

...