Mesh

In the outline window, click on . The only thing we will control for this geometry's mesh is the size of the elements. Go to Mesh Control > Sizing to open up the Sizing menu. Select the entire geometry by clicking then clicking on the model. Now click Geometry > Apply. Also, change the size of the mesh from default to 0.1 in. (If the units are not in inches, change them by going to Units > U.S. Customary (in, lbm, lbf, F, S, V, A)). Now, generate the mesh by clicking Mesh > Generate Mesh. The final result should look something like this:

...