Comparison of Conventional Filtration Technologies to AguaClara's Proposed System

Filtration is a part of the water treatment process in which colloidal and suspended material are removed from water by passing through layers of porous media like sand, foam, or fabric. After a while, these dirt materials build up in or on the surface of the media, so the filter needs to be cleaned. This is usually done through backwashing, sending clean water backwards through the filter medium to dislodge particles. Here are two examples of conventional filtration plants in Honduras, one conventional and one multistage filtration:

Santa Rosa Water Filtration Plant

San Pedro de Tutule FIME PlantBoth of these filtration systems are powered by gravity, which is something AguaClara strives for as well.(multistage) Plant

Multistage filtration is the "other" low-tech option for communities using surface waters. Some features of multistage filtration are:

• Usually no coagulants
• Gravel roughing filters
• Polished with slow sand filters
• Large capital costs for construction
• No chemical costs
• Labor intensive operation

One disadvantage of the Tutule FIME plant is that it takes up a lot of space. Multi-filtration plants are generally 7-25 times bigger than the AguaClara sedimentation tank. We are designing our whole filtration system to be about the same size of as the AguaClara sedimentation tank. We want to keep our system small so that a minimal amount of materials are required, keeping the price down.

AguaClara also strives to make the treatment plant as simple as possible to operate, so multistage filtration is not an option since it is so labor intensive.

Both of these filtration systems are powered by gravity, which is something AguaClara strives for as well.

One problem we observed with the Santa Rosa system is that it has eight filters, and to backwash one filter, it uses all the other seven. That means that during backwashing, all of the water that gets filtered goes towards backwashing, so production of clean water is stopped. Backwashing only takes about ten minutes per filter, but with eight filters, it adds up to a lot of time and water spent backwashing.

...