Analysis of the effect of alum dose and flocculator length on flocculation

Introduction

The goal of this experiment is to study the effects of different alum doses and flocculator lengths in order to find the most effective way to improve the performance of the actual AguaClara flocculator. A well performing flocculator produces flocs of certain sizes that can settle in the sedimentation tank but do not prevent the formation of a floc blanket and a low resulting turbidity indicating the production of clean water.

...

In addition to the use of alum, the optimization of the flocculator's length is critical. Long flocculators can produce large flocs that settle out in the flocculator before reaching the sedimentation tank. Conversely, in short flocculators flocs will not have a long enough collision time to reach a large floc size. Through experiments, we aim to find the best combination of alum dosage and flocculator length that performs most efficiently.

Results and Discussion

The following results are from the experiments conducted with varying influent turbidity and flocculator length. See detailed analysis of each experiment in data analysis.

...