*** This version of Confluence is for testing only and contains a copy of content from June 29th 2026. No changes will be preserved. ***
...
Find a 7 kPa pressure sensor and plug it into the Sensor Box. Note the location of sensor by the number.
[picture of pressure sensor plugged into sensor box, highlight location)
Step Two: Add the Pressure Sensor to the Experiment
Plug the pressure sensor into the tank at the bottom. Fit a 0.25" O.D. inflexible tubing over the end of the pressure sensor that should be in contact with the water as shown in the picture below.
picture of pressure sensor connected to larger tank
Step Three: Open Appropriate Sensor Calibration File in Process Controller
...