Page History

 \\
{excel:file=Design^Variable Naming Guide.xls\|sheets=Materials List Inputs}\\ 
\\
\ \
\ \
\ |\| Variable Name 
\\
\ |\| English Description 
\\
\ |\|
\\
| A.SedManifoldEntrance | Area of the port cut in the inlet channel \\ |
| A.SedSludge | Cross-sectional area of rectangular sed sludge drain \\ |
| B.PipeSedPlateFrame | Center-to-center distance between pipes in the sed plate frame \\ |
| B.PipeSedPlateStand \\ | Center-to-center distance between pipes in the plate settlers stand \\ |
| H.Et \\ | Height of the entrance tank wall \\ |
| H.ExitChannel \\ | Height of the exit channel \\ |
| H.Floc | Total Height of the flocculator \\ |
| H.InletChannel | Height of the inlet channel \\ |
| H.Sed | Height of the sedimentation tank \\ |
| L.Channel | Length of the inlet channel \\ |
| L.Et | Length of the entrance tank \\ |
| L.ExitChannel | Length of the exit channel \\ |
| L.Sed | Total Length of the sedimentation tank \\ |
| L.SedLaunders | Length of the sed tank launders \\ |
| L.SedPlate | Length of the plate settlers \\ |
| L.SedPlateSheet | Length of sheets used to make plate settlers \\ |
| L.SedSlopeManifold | Length of the concrete plate creating the top of the inlet manifold \\ |
| N.FlocChannels | Number of floc channels \\ |
| N.FlocChannelBaffles | Number of floc baffles in each channel \\ |
| N.Launders | The number of launders \\ |
| N.PipeSedPlateStand | Number of pipes in the plate settlers stand \\ |
| N.SedBays | The number of sedimentation bays \\ |
| N.SedInletPipes | The number of sed inlet pipes \\ |
| N.SedLaunders | Number of Sed Launders \\ |
| N.SedPlates | Number of Sed Plates \\ |
| N.SedPlatesPerSheet | Number of plate settlers per lamella sheet \\ |
| N.SedPlatesTotal | Total number of plate settlers \\ |
| N.SedPorts | Number of sed ports \\ |
| N.SedTanks | The total number of sedimentation tanks \\ |
| N.Valves | Number of valves \\ |
| Q.AlumStockMax | Flow rate for aluminum stock tank \\ |
| T.ChannelWall | Thickness of the inlet and exit channels \\ |
| T.EtWall | Thickness of an entrance tank wall \\ |
| T.FlocBaffle | Thickness of flocculator baffle material \\ |
| T.PltWall | Thickness of a plant wall \\ |
| T.PlantWall | Thickness of a plant wall \\ |
| T.SedManifoldEntrance | Thickness of port made in inlet channel \\ |
| T.SedSlopePlate | Thickness of the sed slope plate \\ |
| Ti.StockMin | Duration of alum stock tank at maximum alum dose and plant flow rate |
| W.Et | The width of the entrance tank \\ |
| W.ExitChannel | The width of the exit channel \\ |
| W.FlocChannel | The width of the floc channel \\ |
| W.InletChannel | The width of the inlet channel \\ |
| W.Sed | Width of a sed tank \\ |
| W.SedSlopePlate | Width of a sed slope plate \\ |
| | |